Brother International PR1055X Operation Manual - Page 76
Displaying the fabric in the background, Positioning the pattern on thick fabric
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
■ Displaying the fabric in the background Whether or not the fabric is displayed in the background can be specified. In addition, [Standard] or [Fine] can be selected for the quality of the background image. 1 2 3 4 Affix the embroidery positioning sticker to the fabric i within the area indicated by the red frame in the LCD, and then touch . 1 Set to [ON] to leave the fabric displayed in the background. 2 When set to [OFF], the background will disappear. 3 Select the quality of the background image. 4 Remove the background image completely. ■ Positioning the pattern on thick fabric When positioning the pattern on the fabric thicker than 2 mm (5/64 inch), the fabric may not be detected correctly. In order for the fabric to be correctly detected, its thickness must first be measured. Hoop the fabric in the embroidery frame, and then a attach the frame to the machine. Select the pattern. b Touch . c The embroidery settings screen appears. Locate [Fabric Thickness Check] in the Settings pages. d Select [ON] to activate the setting. e When the following message appears, remove the j embroidery positioning sticker, and then touch . The embroidery positioning sticker affixed to the fabric is detected, and then the embroidery frame will be moved. Continue with step f on page 73 to align the pattern k with the desired embroidery position. CAUTION • Use fabrics with a thickness of less than 2 mm (approx. 5/64 inch). Using fabrics thicker than 2 mm (approx. 5/64 inch) may cause the needle to break. Touch f to return to the previous screen. Touch . g When the message the machine moves appears, touch h . 74