Brother International PR1055X Operation Manual - Page 117

Affix the second sticker and then touch . e ADVANCED EMBROIDERY Resume feature If the machine is turned off while the pattern connecting function is being used, the machine will return to the operation indicated below when it is turned on again. The machine operation will differ depending on when it is turned off. Example: When connecting two patterns  The camera detects the second positioning sticker. After the two positioning stickers have been detected, f the following message appears. While making sure that the positioning stickers do not peel off, rehoop the fabric according to the example displayed on the onscreen instruction. Select the first pattern. Touch the pattern connection key . Begin embroidering the first pattern.  Finish embroidering the first pattern. (A) If the machine is turned off during any operation in this box, the machine will return to (A) when it is turned on again. 3 1 Embroidering area  Select the second pattern.  Touch .  1 Specify the reference point for connecting the pattern.  Start detecting positioning stickers (2 locations).  Finish detecting positioning stickers. (B) If the machine is turned off during any operation in this box, the machine will return to (B) when it is turned on again. 1 Pattern to be embroidered next 2 Embroidery sheet Continue the operation from step o on page 112 after g touching .  Rehoop the fabric.  115