Brother International PR1055X Operation Manual - Page 19

• When lubricating the machine, wear protective eyeglasses and gloves to prevent the oil or grease from getting into your eyes or on your skin. Do not put the oil or grease into your mouth. Keep the oil and grease out of the reach of children. • While attaching or detaching an embroidery frame or other included accessory or while maintaining the machine, be careful nothing interferes with the moving parts of the machine. Setup location Set up the machine in a location that meets the following requirements. • Position the machine a minimum of 50 mm (2 inches) away from the wall. • Allow sufficient space around the machine. • Place no objects within the moving range of the embroidery frame. • Set-up machine near an electrical outlet. • Use a level and stable surface, such as a desk or stand. • Use a surface that can support the weight of the machine (about 41.8 kg (92 lb)). • Allow open space around the ventilation slots found on the rear underside of the machine. GETTING READY CAUTION • In order to prevent malfunctions or damage, do not set up the machine in a location 1 exposed to the following conditions. - Liquids, such as water - Extreme dust - Direct sunlight - Extremely high or extremely low temperatures. The operating environment should be between 5 °C (40 °F) and 40 °C (104°F). - Insufficient space - Objects within the moving range of the embroidery frame - Blocked ventilation slots - An unstable surface • Do not use extension cords or multi-plug adapters with many other appliances plugged in to them. 790 mm (31-1/8 inches) Minimum of 50 mm (2 inches) 589 mm (23-1/4 inches) More than 561 mm 210 mm (22 inches) (8-1/4 inches) More than 350 mm (13-3/4 inches) More than 220 mm (8-3/4 inches) 17