Brother International PR1055X Operation Manual - Page 131
Embroidering a pattern aligned with a mark on, the fabric
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Use l to align the needle with the end of embroidering for the previous pattern. • Touch to check the needle drop point on the LCD screen. Before displaying the camera image, specify the appropriate image settings. (page 73) - Better camera image results can be achieved with the appropriate settings. • Touch to zoom up the camera view. ADVANCED EMBROIDERY ■ Embroidering a pattern aligned with a mark on the fabric By specifying the beginning of stitching and the end of stitching, the exact position of the pattern can be checked. Touch a in the embroidering settings screen. Select . b Set the beginning of stitching in the lower-left corner. c Note • You can also follow the procedure of "Finding the embroidering position" on page 80, by directly place the needle over the end of the previous pattern. Touch . m Touch , and then press the "Start/Stop" n button to begin embroidering the remaining character patterns. The frame moves so that the needle drop point aligns with the beginning of stitching. With a fabric marker, mark this point on the fabric. d 3 Set the beginning of stitching in the lower-right corner. e The frame moves so that the needle drop point aligns with the beginning of stitching. With a fabric marker, mark this point on the fabric. f Remove the embroidery frame from the machine, and g then connect these two points to check the embroidering position. • If the baseline is misaligned or intersects another line, reframe the fabric in the embroidery frame or adjust the position of the pattern. 129