Brother International PR1055X Operation Manual - Page 86
Pass the thread along the number 1 slot to pass
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Hold the thread with both hands, and then pass it e under the guide plate from the right. (steps f through g) may differ depending on the spool number. Passing the thread through the thread guide pins is designed to prevent the thread from becoming tangled. Be sure to follow the thread path indicated on the machine. 1 Upper thread guide plate Wind the thread clockwise once around the number 1 f thread tension disc. Pass the thread along the number 1 slot to pass it h through the number 1 take-up lever hole from right to left. 1 Thread tension disc 2 Pass thread in a clockwise direction at this location on the tension disks. • Make sure that the thread is securely positioned in the thread tension. Note • All thread tension discs are threaded in clockwise direction. Lead the thread along the thread path and around the g correct thread guide pins as indicated on the machine, then slip the thread under the number 1 middle thread guide plate from the right. 1 Thread take-up lever Pass the thread down through the slot to the lower i thread guide, and then through the hole in the number 1 lower thread guide. a 1 Hole in lower thread guide 1 Thread guide pin 2 Middle thread guide • The path from the upper thread guide around the thread tension disc and to the middle thread guide 84