Brother International PR1055X Operation Manual - Page 105

ADVANCED EMBROIDERY Using a frame pattern to create appliqués With this method, there is no need to change the fabric in the embroidery frame. The appliqué can be created by embroidering two frame patterns of the same size and shape-one embroidered with straight stitches and the other embroidered with satin stitches. Select a frame pattern embroidered with straight a stitches and embroider onto the base fabric. Remove the embroidery frame from the machine, and d then cut off the excess appliqué fabric along the outside of the stitching. Note • Leave the fabric in the embroidery frame when cutting off the excess appliqué fabric. In addition, do not apply extreme pressure to the framed fabric, otherwise the fabric could become loose. Select the satin-stitched frame pattern with the same e shape. 3 Place the appliqué fabric over the embroidery stitched b in step a. Make sure that the appliqué fabric is larger than the embroidered area. Note • If the size or embroidering position of the straightstitched frame pattern is changed, be sure to change the size or embroidering position of the satin-stitched frame pattern in the same way. Attach the embroidery frame removed in step d, and f then finish embroidering the appliqué. Embroider over the appliqué fabric using the same c frame pattern. • Be sure to stop the machine before the cross at the center is embroidered. 103