Brother International PR1055X Operation Manual - Page 25

GETTING READY The carriage moves to its initial position. e • If the number 1 needle bar is not already at the embroidering position, the needle bar case moves and the number 1 needle bar moves to the embroidering position. CAUTION • Make sure to keep your hands and other items away from the carriage, in order to prevent any injuries. Set the main power switch to "O" to turn off the f machine. Memo • If the machine is turned off in the middle of embroidering, the machine will automatically save the design position when turned on again. At that time, you will be asked if you wish to continue embroidering or begin a new operation. (page 97) ■ Setting your machine for the first time When you first turn on the machine, set the language and time/date to your language and local time/date. Follow the procedure below when the settings screen appears automatically. Touch and to set your local language and then a touch . Touch c to start using your machine.  The clock starts from 0 second of the time you set. Note • The time/date you set may be cleared, if you don't turn on the machine for an extended period of time. • Time setting is also available by touching on the bottom right of the LCD screen. 1  The carriage moves to its initial position. The message screen, confirming if you want to set b time/date, appears. Touch . 1 2 3 4 5 1 Select [ON] to display time/date on the screen. 2 Touch or to select the date display format. 3 Set the year [YYYY], month [MM] and date [DD]. 4 Select whether 24h or 12h setting to display. 5 Set the current time. 23