Brother International PR1055X Operation Manual - Page 141
Removing the wide table
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
ADVANCED EMBROIDERY Tighten the two thumb screws so that the wide table is f secured. After the pins on each side reach the notches in the b guide plates, raise the wide table to lift the pins up through the notches. 1 Thumb screw Removing the wide table Loosen the two thumb screws, lift up the wide table, a and then pull it off toward you. 3 1 Pin 2 Notch Remove the wide table from the machine. Carefully pull out the wide table so that it does not hit c the machine. 1 Thumb screw Tighten the thumb screws on the wide table. d 139
ADVANCED EMBROIDERY
139
3
f
Tighten the two thumb screws so that the wide table is
secured.
1
Thumb screw
Removing the wide table
a
Loosen the two thumb screws, lift up the wide table,
and then pull it off toward you.
1
Thumb screw
b
After the pins on each side reach the notches in the
guide plates, raise the wide table to lift the pins up
through the notches.
1
Pin
2
Notch
Remove the wide table from the machine.
c
Carefully pull out the wide table so that it does not hit
the machine.
d
Tighten the thumb screws on the wide table.