Brother International PR1055X Operation Manual - Page 59

BASIC EMBROIDERY SWITCHING THE THREAD COLORS ON THE SCREEN If a thread color on the spool stand is different than the needle position thread color on the screen, the thread colors on the screen can be switched to match the spool stand thread color position. Memo • This function is not available when you set [Manual Color Sequence] to [ON] in settings screen. Touch a in the embroidering screen. ■ To cancel the thread color settings for all previously stitched design Memo • The color settings will be completely canceled even if the machine is in the middle of the embroidery. Touch . a 2  The spool selection screen appears. Touch the number of the first needle bar that will be b switched. • To cancel the selection, touch the same needle number again.  The thread color setting is canceled. Touch . b  Thread colors are assigned by the machine again, regardless of the previous spool setting. Note • This function will not clear anchor settings of any of the needles which have been assigned a thread color. (page 121) Touch the number of the other needle bar that will be c switched. The two needle numbers are connected with an arrow. Touch d to switch the two thread colors. After making the desired changes, touch . e 57