Brother International PR1055X Operation Manual - Page 137
Embroidery Applications
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
ADVANCED EMBROIDERY Disabling the Link function Touch , then . a The general settings screen appears. Locate [Link]. b Touch [OFF] to disable the Link function. c When the message to finish the Link mode appears, touch . Turn off the machine. d EMBROIDERY APPLICATIONS Embroidering split (large-size) patterns Split (large-size) patterns created with PE-DESIGN version 7 or later can be embroidered. With large-size patterns, embroidery designs larger than the embroidery hoop are divided into multiple sections, which combine to create a single pattern after each section is embroidered. For details on creating large-size embroidery patterns and for more detailed embroidering instructions, refer to the manual included with PE-DESIGN version 7 or later. The following procedure describes how to read the large-size embroidery pattern shown below from USB media and embroider it. 3 Note • When you turn off the machine, wait for about 5 seconds before turning on the machine again. Connect to the machine the media containing the a created large-size embroidery pattern, and then select the large-size embroidery pattern to be embroidered. * For details on retrieving patterns, refer to page 130. A screen appears so that a section of the large-size embroidery pattern can be selected. 135