Brother International PR1055X Operation Manual - Page 73

BASIC EMBROIDERY Automatic lock stitch setting When the machine is purchased, it is set to automatically embroider lock stitches at the beginning of the pattern, before embroidering after each thread color change, and before trimming the thread. ■ To change the lock stitches being embroidered at the beginning of the pattern, at the beginning of embroidering each thread color change and at the beginning of embroidering after the thread trim. Touch a so that it changes to . Thread color sorting You can embroider while replacing the thread spool a minimal number of times. Before starting to embroider, touch in the embroidering settings screen to rearrange the embroidering order and sort it by thread colors. Embroidery screen 2 • Each touch of the key turns the setting either on or off. Automatic lock stitch setting turned on Automatic lock stitch setting turned off Memo • If the first stitch length is less than 0.8 mm (1/32 inch), the lock stitch won't be inserted. • If [Thread Trimming] is set [OFF] in the settings screen, the lock stitch won't be inserted. (page 123) ■ To change the lock stitches being embroidered before the thread is trimmed. Touch a so that it changes to . Embroidering settings screen • Each touch of the key turns the setting either on or off. Embroidery screen Automatic lock stitch setting turned on Automatic lock stitch setting turned off Memo • The automatic lock stitch setting stays the same until the key is touched to turn it off. The setting specified before the machine is turned off remains selected the next time that the machine is turned on. • If [Thread Trimming] is set [OFF] in the settings screen, the lock stitch won't be inserted. (page 123) 71