Brother International PR1055X Operation Manual - Page 67
Correctly using the embroidery frames
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
BASIC EMBROIDERY Loosen the two left thumb screws on the embroidery a frame holder. If the screw is too tight, please use the included 3 way screwdriver. 1 Left arm 2 Thumb screws The left arm of the embroidery frame holder can be moved. • Only loosen the thumb screws a maximum of 2 turns counterclockwise. Do not remove the screw. Move the left arm to align the screw on the right side b with the mark for the embroidery frame to be installed, and then tighten the thumb screws. For this example, align the small thumb screw with mark 5. Note • Please firmly tighten the two thumb screws with included 3 way screwdriver. If the thumb screws are not tightened, any of the following problems may occur. - The machine will detect the embroidery frame size incorrectly. - The starting position for the embroidery frame is misaligned. - The embroidery pattern is misaligned. The embroidery frame holder is ready for the embroidery frame to be attached. Hold the embroidery frame level, and then c simultaneously align both the left and right mounts with the embroidery frame holder clips. • The inner frame should be on top. Insert the embroidery frame until it snaps into place. d 2 1 Mark for extra-large embroidery frame 360 mm (W) × 200 mm (H) (14 inches (W) × 7-7/8 inches (H)) 2 Mark for extra-large embroidery frame 300 mm (W) × 200 mm (H) (11-3/4 inches (W) × 7-7/8 inches (H)) (optional) 3 Mark for large embroidery frame 180 mm (W) × 130 mm (H) (7-7/8 inches (W) × 5-1/8 inches (H)) 4 Mark for medium embroidery frame 100 mm (W) × 100 mm (H) (4 inches (W) × 4 inches (H)) 5 Mark for small embroidery frame 60 mm (W) × 40 mm (H) (2-3/8 inches (W) × 1-1/2 inches (H)) 1 Make sure that the pins on the left and right arms of the embroidery frame holder fit into the positioning slot and hole on the embroidery frame. Correctly using the embroidery frames Various types of embroidery frames can be used with this machine to suit your project. In addition to the included embroidery frames, there are many frames that can be used with this machine. (Refer to "Optional accessories" on page 14.) CAUTION • Only use embroidery frames of the sizes indicated in the screen, otherwise the embroidery frame may hit the presser foot, which may result in injuries. 65