Brother International PR1055X Operation Manual - Page 157

Candlewicking Stitch [Size] [Spacing] Increases/reduces the size of the stitch. Specifies the spacing of the candlewicking stitch. Chain stitch [Size] [Thickness] Increases/reduces the size of the stitch. Sets repeated embroidering at the same part. E stitch [Stitch Width] [Spacing] [Thickness] [Flip] Increases/reduces the size of the stitch. Specifies the spacing of the E stitch. Sets repeated embroidering at the same part. Specifies the decorative line showing up to the inside or to the outside. V stitch [Stitch Width] [Spacing] [Thickness] [Flip] Increases/reduces the size of the stitch. Specifies the spacing of the V stitch. Sets repeated embroidering at the same part. Specifies the decorative line showing up to the inside or to the outside. Motif stitch [Size] [Spacing] [Flip] Increases/reduces the size of the stitch. Specifies the spacing of the motif stitch. Specifies the decorative line showing up to the inside or to the outside. ■ Region Settings 1 3 MY DESIGN CENTER Fill stitch settings [Direction] [Density] [Pull compensation] [Under sewing] Specifies the embroidering direction. Select [Manual] to change to the desired direction of fill stitch. Specifies the stitch density of fill stitch. Specifies to correct the shrinkage of the pattern by slightly shortening or lengthening the stitching. Change the setting after you test embroidering the pattern and can check the shrinkage. Select if you need or do not need the under embroidery for the stabilized fabric. Stippling stitch settings [Run Pitch] [Spacing] [Distance] [Stitch] Specifies the length of a stitch of the stippling stitch. Specifies the spacing between the stitches when embroidering the stippling stitch. Specifies the offset from the pattern outline. Specifies the stitch type. 4 Decorative fill stitch settings [Size] Increases/reduces the size of the pattern. [Direction] [Outline] Specifies the rotation angle of the pattern. Select whether [ON] or [OFF]. The outline is also converted to embroidery data. If [ON] is selected, the number of thread jumps can be reduced. [Random shift] Randomly varies the line. [Position Offset] [Thickness] Specifies the reference point for the pattern. Sets repeated embroidering at the same part. Select the setting to be changed, and then change the b setting in the screen that appears. (In this example, the embroidering direction will be changed.)  The setting screen appears. Touch , and then use c direction. to change the 2 1 Shows the stitch type and color for the selected region. 2 Shows/Changes the stitch settings for the selected region. 3 Choices for stitch type and color of selected region. Touch d to apply the setting. * Change other settings in the same way. 155