Cisco MCS-7825-H3-IPC1 Service Guide - Page 157

Chapter 5 Cisco Unified Real-Time Monitoring Tool Tracing, PerfMon Counters, and Alerts Performance Monitoring in RTMT Table 5-1 Counter Alert Configuration Parameters Setting Threshold Pane Trigger alert when Over and Under conditions get met Value Calculated As Pane Absolute, Delta, Delta Percentage Duration Pane Trigger alert only when value constantly...; Trigger alert immediately Description Check the box and enter the value that applies. • Over-Check this box to configure a maximum threshold that must be met before an alert notification is activated. In the Over value field, enter a value. For example, enter a value that equals the number of calls in progress. • Under-Check this box to configure a minimum threshold that must be met before an alert notification is activated. In the Under value field, enter a value. For example, enter a value that equals the number of calls in progress. Tip Use these boxes in conjunction with the Frequency and Schedule configuration parameters. Click the radio button that applies. • Absolute-Choose Absolute to display the data at its current status. These counter values are cumulative. • Delta-Choose Delta to display the difference between the current counter value and the previous counter value. • Delta Percentage-Choose Delta Percentage to display the counter performance changes in percentage. • Trigger alert only when value constantly...-If you want the alert notification only when the value is constantly below or over threshold for a desired number of seconds, click this radio button and enter seconds after which you want the alert to be sent. • Trigger alert immediately-If you want the alert notification to be sent immediately, click this radio button. OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 5-3