Cisco MCS-7825-H3-IPC1 Service Guide - Page 928

IF-MIB Chapter 8 Industry-Standard Management Information Base A system is normally able to use any unicast address which corresponds to an entry in this table as a source address. ::= { ifMIBObjects 4 } ifRcvAddressEntry OBJECT-TYPE SYNTAX IfRcvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex. INDEX { ifIndex, ifRcvAddressAddress } ::= { ifRcvAddressTable 1 } IfRcvAddressEntry ::= SEQUENCE { ifRcvAddressAddress PhysAddress, ifRcvAddressStatusRowStatus, ifRcvAddressType INTEGER } ifRcvAddressAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION An address for which the system will accept packets/frames on this entry's interface. ::= { ifRcvAddressEntry 1 } ifRcvAddressStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION This object is used to create and delete rows in the ifRcvAddressTable. ::= { ifRcvAddressEntry 2 } ifRcvAddressType OBJECT-TYPE SYNTAX INTEGER {other(1), volatile(2), nonVolatile(3) } MAX-ACCESS read-create STATUS current DESCRIPTION This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(2) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart. DEFVAL { volatile } ::= { ifRcvAddressEntry 3 } 8-124 Cisco Unified Communications Manager Managed Services Guide OL-22523-01