Cisco MCS-7825-H3-IPC1 Service Guide - Page 755

Chapter 7 Cisco Management Information Base CISCO-CCM-MIB Table 7-5 How to Check CISCO-CCM-MIB SNMP Traps Trap ccmPhoneStatusUpdate ccmPhoneFailed MediaResourceListExhausted Verification Procedure 1. Set MaxSeverity=Info in CiscoSyslog->dogBasic MIB table. 2. Set PhoneStatusUpdateAlarmInterv=30 or higher in ccmAlarmConfigInfo MIB table. 3. Disconnect a Cisco Unified CM server that your phones point to. 4. Phones will unregister. 5. Connect the Cisco Unified CM server again. 6. Phones will re-register. 7. Check that the ccmPhoneStatusUpdate trap is generated. 1. Set MaxSeverity=Info in CiscoSyslog->clogBasic MIB table. 2. Set PhoneFailedAlarmInterv=30 or higher in ccmAlarmConfigInfo MIB table. 3. Make a phone fail. Delete a phone Cisco Unified Communications Manager Administration and register the phone again. 4. Check that the ccmPhoneFailed trap is generated. 1. Create a Media Resource Group (MRG) that contains one of the standard Conference Bridge resources (CFB-2). 2. Create a Media Resource Group List (MRGL) that contains the MRG just created. 3. In the Phone Configuration window (for actual phones), set MRGL as the phone Media Resource Group List. 4. Stop the IPVMS, which makes the Conference Bridge resource(CFB-2) stop working. 5. If you make conference calls with phones that use the media list, you will see "No Conference Bridge available" in the phone screen. 6. Check that a MediaListExhausted Alarm/Alert/Trap is generated OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 7-113