Cisco MCS-7825-H3-IPC1 Service Guide - Page 778

CISCO-CDP-MIB Chapter 7 Cisco Management Information Base ::= { cdpCacheEntry 11 } cdpCacheDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(1), halfduplex(2), fullduplex(3) } MAX-ACCESS read-only STATUS current DESCRIPTION The remote device interface duplex mode, as reported in the most recent CDP message. The value unknown(1) indicates no duplex mode field (TLV) was reported in the most recent CDP message. ::= { cdpCacheEntry 12 } cdpCacheApplianceID OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION The remote device Appliance ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message. ::= { cdpCacheEntry 13 } cdpCacheVlanID OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION The remote device VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported in the most recently received CDP message. ::= { cdpCacheEntry 14 } cdpCachePowerConsumption OBJECT-TYPE SYNTAX Unsigned32 UNITS milliwatts MAX-ACCESS read-only STATUS current DESCRIPTION The amount of power consumed by remote device, as reported in the most recent CDP message. This object is not instantiated if no Power Consumption field (TLV) was reported in the most recently received CDP message. ::= { cdpCacheEntry 15 } cdpCacheMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only 7-136 Cisco Unified Communications Manager Managed Services Guide OL-22523-01