Cisco MCS-7825-H3-IPC1 Service Guide - Page 817

Chapter 8 Industry-Standard Management Information Base SYSAPPL-MIB SysApplPastRunEntry ::= SEQUENCE { sysApplPastRunIndex Unsigned32, sysApplPastRunStarted DateAndTime, sysApplPastRunExitState INTEGER, sysApplPastRunTimeEnded DateAndTime sysApplPastRunIndex OBJECT-TYPE SYNTAX Unsigned32 (1...ffffffffh) MAX-ACCESS not-accessible STATUS current DESCRIPTION Part of the index for this table. An integer matching the value of the removed sysApplRunIndex corresponding to this row. ::= { sysApplPastRunEntry 1 } sysApplPastRunStarted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION The date and time that the application was started. ::= { sysApplPastRunEntry 2 } sysApplPastRunExitState OBJECT-TYPE SYNTAX INTEGER { complete (1), failed (2), other (3) } - complete (1)-normal exit at sysApplRunTimeEnded - failed (2)-abnormal exit - other (3) MAX-ACCESS read-only STATUS current DESCRIPTION The state of the application instance when it terminated. This value is based on an evaluation of the running elements of an application and their Roles as defined by sysApplInstallElmtRole. An application instance is said to have exited in a COMPLETE state and its entry is removed from the sysApplRunTable and added to the sysApplPastRunTable when the agent detects that ALL elements of an application invocation are no longer running. Most agent implementations will wait until a second internal poll has been completed to give the system time to either restart partial failures or to give all elements time to exit. A failed state occurs if, after the second poll, any elements continue to run but one or more of the REQUIRED elements are no longer running. All other combinations MUST be defined as OTHER. ::= { sysApplPastRunEntry 3 } sysApplPastRunTimeEnded OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 8-13