Cisco MCS-7825-H3-IPC1 Service Guide - Page 275

Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages Preconfigured CallManager Alarm Notifications Table 6-36 Default Configuration for the IMEOverQuota Alert (continued) Value Default Configuration Enable/Disable this Enabled on listed servers alert on the following servers Threshold Trigger alert when following condition met: VAP Over Quota Duration Trigger alert immediately Frequency Trigger alert on every poll Schedule 24 hours daily Enable E-mail Selected Trigger Alert Action Default IMEQualityAlert This alert gets generated when Cisco Unified Communications Manager determines that a substantial number of Cisco IME calls fail back to PSTN or fail to be set up due to IP network quality problems. Two types of events trigger this alert: A large number of the currently active Cisco IME calls have all requested fallback or have fallen back to the PSTN. A large number of the recent call attempts have gone to the PSTN and not been made over IP. When you receive this alert, check your IP connectivity. If no problems exist with the IP connectivity, you may need to review the CDRs, CMRs, and logs from the firewalls to determine why calls have fallen back to the PSTN or have not been made over IP. Default Configuration Table 6-37 Default Configuration for the IMEQualityAlert Alert Value Default Configuration Enable Alert Selected Severity Error Enable/Disable this Enabled on listed servers alert on the following servers Threshold Trigger alert when following condition met: Cisco IME link quality problem Duration Trigger alert immediately Frequency Trigger alert on every poll Schedule 24 hours daily Enable E-mail Selected Trigger Alert Action Default OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 6-41