Cisco MCS-7825-H3-IPC1 Service Guide - Page 456

Warning-Level Alarms Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages 30002 30006 30007 30008 30016 30018 30019 30027 30028 30032 30035 CISCO_7920 CISCO_7970 CISCO_7912 CISCO_7902 CISCO_IP_COMMUNICATOR CISCO_7961 CISCO_7936 ANALOG_PHONE ISDN_BRI_PHONE SCCP_GATEWAY_VIRTUAL_PHONE IP_STE Recommended Action In the Cisco Unified Reporting tool, run the Unified CM Multi-Line Devices report and check the number of lines that are supposed to be configured on the device identified in this alarm. If the device has registered an inconsistent number of lines compared the Multi-Lines report for this device, restart the device so that it can reregister all lines. If this alarm persists, verify that the appropriate number of lines has been configured on the device, and that the appropriate directory numbers have been configured. If the device is a third-party SIP phone, verify that the directory numbers configured on the phone match the directory numbers configured on the device in Unified CM Administration. DeviceTransientConnection A connection was established and immediately dropped before completing registration. Incomplete registration may indicate that a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection. Network connectivity problems can affect device registration, or the restoration of a primary Unified CM may interrupt registration. History Cisco Unified Communications Release 8.0(1) 7.1 Action • Severity changed from Error to Warning. • Following information is updated: - Enum Definitions for DeviceType - Enum Definitions - Enum Definitions for IPAddrAttributes - Enum Definitions for IPV6AddrAttributes IPv6 parameters added: IPV6Address[Optional][String], IPAddrAttributes[Optional][Enum], and IPV6AddrAttributes[Optional][Enum]. 6-222 Cisco Unified Communications Manager Managed Services Guide OL-22523-01