Cisco MCS-7825-H3-IPC1 Service Guide - Page 660
deviceNoResponse: Device is not responding Service Control Notify from Cisco Unified CM
View all Cisco MCS-7825-H3-IPC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 660 highlights
CISCO-CCM-MIB Chapter 7 Cisco Management Information Base callManagerRestart: A device restart was initiated from Cisco Unified CM Administration, either due to an explicit command from an administrator or due to a configuration change such as adding, deleting or changing a directory number associated with the device. duplicateRegistration: Cisco Unified CM detected that the device attempted to register to two nodes at the same time. Cisco Unified CM initiated a restart to the phone to force it to re-home to a single node. callManagerApplyConfig: Cisco Unified CM configuration is changed. deviceNoResponse: Device is not responding Service Control Notify from Cisco Unified CM. emLoginLogout: The device has been unregistered due to an Extension Mobility login or logout. emccLoginLogout: The device has been unregistered due to an Extension Mobility Cross Cluster login or logout. powerSavePlus: The device powered off as a result of the Power Save Plus feature that is enabled for this device. When the device powers off, it remains unregistered from Cisco Unified CM until the Phone On Time defined in the Product Specific Configuration for this device. callManagerForcedRestart: (SIP Only) The device did not respond to an Apply Config request and as a result, Cisco Unified CM had sent a restart request to the device. The device may be offline due to a power outage or network problem. Confirm that the device is powered-up and that network connectivity exists between the device and Cisco Unified CM. sourceIPAddrChanged: (SIP Only) The device has been unregistered because the IP address in the Contact header of the REGISTER message has changed. The device will be automatically reregistered. No action is necessary. sourcePortChanged: (SIP Only) The device has been unregistered because the port number in the Contact header of the REGISTER message has changed. The device will be automatically reregistered. No action is necessary. registrationSequenceError: (SCCP only) A device requested configuration information from the Cisco Unified CM at an unexpected time. The Cisco Unified CM no longer had the requested information in memory. invalidCapabilities: (SCCP only) The Cisco Unified CM detected an error in the updated media capabilities reported by the device. The device reported the capabilities in one of the StationUpdateCapabilities message variants. fallbackInitiated: The device has initiated a fallback and will automatically reregister to a higher-priority Cisco Unified CM. No action is necessary. deviceSwitch: A second instance of an endpoint with the same device name has registered and assumed control. No action is necessary. SYNTAX INTEGER { noError(0), unknown(1), noEntryInDatabase(2), databaseConfigurationError(3), deviceNameUnresolveable(4), maxDevRegExceeded(5), connectivityError(6), initializationError(7), 7-18 Cisco Unified Communications Manager Managed Services Guide OL-22523-01