Cisco MCS-7825-H3-IPC1 Service Guide - Page 175

Chapter 5 Cisco Unified Real-Time Monitoring Tool Tracing, PerfMon Counters, and Alerts Performance Monitoring in RTMT Table 5-14 Cisco H.323 (continued) Counters CallsRejectedDueToICTCallThrottling VideoCallsActive VideoCallsCompleted Counter Description This counter represents the total number of calls that are rejected due to Intercluster Trunk (ICT) call throttling since the start of the Cisco CallManager service. When the system reaches a threshold limit of 140 calls per 5 seconds, ICT will start throttling (rejecting) new calls. One cause for ICT call throttling occurs when calls across an ICT enter a route loop condition. This counter represents the number of video calls with video streaming connections that are currently active (in use) on all H.323 trunks that are registered with a Cisco Unified Communications Manager; in other words, the number of calls that actually have video-streaming connections on a Cisco Unified Communications Manager. This counter represents the number of video calls that were actually connected with video streams for all H.323 trunks that were registered with a Cisco Unified Communications Manager. This number increases when the call terminates. Cisco Hunt Lists The Cisco Hunt Lists object provides information about the hunt lists that are defined in Cisco Unified Communications Manager Administration. Table 5-15 contains information about Cisco hunt list counters. Table 5-15 Cisco Hunt Lists Counters CallsAbandoned CallsActive CallsBusyAttempts CallsInProgress CallsRingNoAnswer Counter Description This counter represents the number of abandoned calls that occurred through a hunt list. An abandoned call represents one in which a caller hangs up before the call is answered. This counter represents the number of calls that are currently active (in use) that occurred through a hunt list. An active call represents one that gets distributed and answered, and to which a voice path connects. This counter represents the number of times that calls through a hunt list were attempted when all members of the line and/or route groups were busy. This counter represents the number of calls that are currently in progress through a hunt list. A call in progress represents one that the call distributor is attempting to extend to a member of a line or route group and that has not yet been answered. Examples of a hunt list member include a line, a station device, a trunk device, or a port/channel of a trunk device. This counter represents the total number of calls through a hunt list that rang but that called parties did not answer. OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 5-21