Cisco MCS-7825-H3-IPC1 Service Guide - Page 960

Hewlett Packard MIBs Chapter 9 Vendor-Specific Management Information Base Table 9-12 HP MIBs (continued) MIB CPQTHRSH-MIB CPQHOST-MIB CPQIDE-MIB CPQNIC-MIB OID 1.3.6.1.4.1.232.10 1.3.6.1.4.1.232.11 1.3.6.1.4.1.232.14 1.3.6.1.4.1.232.18 Function Provides alarm threshold management Provides operating system information Provides IDE (CD-ROM) drive status/events Provides Network Interface Card (NIC) status/events HP Status Messages Table 9-13 lists status messages, MIBs and OIDs, MIB object names and clearing values, and object responses. Table 9-13 HP Hardware Status Messages, MIBs and OIDs, MIB Object Names and Clearing Values, and Object Responses Cisco Unified CM Release 6.x MCS-78xx Status Logical Drive1 MIB and OID CPQIDA-MIB 1.3.6.1.4.1.232.3.2.3.1.1.4 MIB Object Name and Clearing Value cpqDaLogDrvStatus Clearing Value = 2 Object Response The logical drive can be in one of the following states: • Ok (2) Indicates that the logical drive is in normal operation mode. • Failed (3) Indicates that more physical drives have failed than the fault tolerance mode of the logical drive can handle without data loss. • Unconfigured (4) Indicates that the logical drive is not configured. • Recovering (5) Indicates that the logical drive is using Interim Recovery Mode. In Interim Recovery Mode, at least one physical drive has failed, but the logical drive's fault tolerance mode lets the drive continue to operate with no data loss. • Ready Rebuild (6) Indicates that the logical drive is ready for Automatic Data Recovery. The physical drive that failed has been replaced, but the logical drive is still operating in Interim Recovery Mode. 9-20 Cisco Unified Communications Manager Managed Services Guide OL-22523-01