Cisco MCS-7825-H3-IPC1 Service Guide - Page 441

Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages Warning-Level Alarms Calling User Id(String) Recommended Action Evaluate the information provided in this alarm (caller's user ID, to and from DNs, and so on) to determine if the call attempt was an innocent mistake to dial a number that the user didn't realize was not routable for him or her, or to discover whether the user is intentionally trying to circumvent the policy restrictions. If the rejected call was caused by an innocent mistake, educate the affected user about the numbers that he or she is allowed to dial. Your organization may have a policy or guidelines to follow when investigating call rejects. In addition to or instead of the steps recommended here, please refer to your company's guidelines. CCDLearnedPatternLimitReached CCD has reached the maximum number of learned patterns allowed. The CCD requesting service has limited the number of learned patterns to a number defined in the service parameter, CCD Maximum Numbers of Learned Patterns. This alarm indicates that the CCD requesting service has met the maximum number of learned patterns allowed. Cisco Unified Serviceability Alarm Definition Catalog CallManager/CallManager Severity WARNING Routing List SDL SDI Sys Log Event Log Parameter(s) CCD Maximum Numbers of Learned Patterns (UInt) System Limit of CCD Learned Patterns (UInt) Recommended Action This alarm displays the value that is configured in the Cisco CallManager service parameter, CCD Maximum Numbers of Learned Patterns, as well as the maximum number of learned patterns that are allowed by the system (an internally-controlled maximum). Consider whether the specified maximum number of learned patterns is correct for your deployment. If it is too low, compare it with the number shown in the SystemLimitCCDLearnedPatterns in this alarm. If the Max number is below the System Limit, you can go to the Service Parameters Configuration window and increase the CCD Maximum Numbers of Learned Patterns service parameter. If the Max and System Limit numbers match, the system is already configured to run at capacity of learned patterns; no action is required. OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 6-207