Cisco MCS-7825-H3-IPC1 Service Guide - Page 700

CISCO-CCM-MIB Chapter 7 Cisco Management Information Base STATUS current DESCRIPTION The ccmPhoneFailedIndex value of the last entry that was added to the ccmPhoneFailedTable. This value together with sysUpTime can be used by the manager applications to identify the new entries in the ccmPhoneFailedTable since their last poll. This value need not be the same as the highest index in the ccmPhoneFailedTable as the index could have wrapped around. The initial value of this object is 0, which indicates that no entries have been added to this table. When the SNMP service is restarted this value will be reset to 0. ::= { ccmGlobalInfo 28 } ccmSystemVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION The installed version of the local Cisco Unified CM system. ::= { ccmGlobalInfo 29 } ccmInstallationId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION The installation component identifier of the local Cisco Unified CM component(ccm.exe). ::= { ccmGlobalInfo 30 } ccmPartiallyRegisteredPhones OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION The number of phones that are partially registered with the local Cisco Unified CM. ::= { ccmGlobalInfo 31 } ccmH323TableEntries OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION The current number of entries in ccmH323DeviceTable. The initial value of this object is 0 and it will be incremented every time when there is an addition to the ccmH323DeviceTable. When the Cisco Unified CM is restarted, this will be reset to 0. ::= { ccmGlobalInfo 32 } ccmSIPTableEntries OBJECT-TYPE 7-58 Cisco Unified Communications Manager Managed Services Guide OL-22523-01