Cisco MCS-7825-H3-IPC1 Service Guide - Page 827

Chapter 8 Industry-Standard Management Information Base SYSAPPL-MIB sysApplElemPastRunTblTimeLimit OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) UNITSseconds MAX-ACCESS read-write STATUS current DESCRIPTION The maximum time in seconds which an entry in the sysApplElemPastRunTable may exist before it is removed. Any entry that is older than this value will be removed (aged out) from the table. Note that an entry may be aged out prior to reaching this time limit if it is the oldest entry in the table and must be removed to make space for a new entry so as to not exceed sysApplElemPastRunMaxRows. DEFVAL { 7200 } ::= { sysApplRun 10 } sysApplAgentPollInterval OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) UNITS seconds MAX-ACCESS read-write STATUS current DESCRIPTION The minimum interval in seconds that the management subsystem implementing this MIB will poll the status of the managed resources. Because of the non-trivial effort involved in polling the managed resources, and because the method for obtaining the status of the managed resources is implementation-dependent, a conformant implementation may chose a lower bound greater than 0. A value of 0 indicates that there is no delay in the passing of information from the managed resources to the agent. DEFVAL { 60 } ::= { sysApplRun 11 } sysApplMap Group This group contains a table, the sysApplMapTable, whose sole purpose is to provide a 'backwards' mapping so that, given a known sysApplElmtRunIndex (process identification number), the corresponding invoked application (sysApplRunIndex), installed element (sysApplInstallElmtIndex), and installed application package (sysApplInstallPkgIndex) can be quickly determined. The table will contain one entry for each process currently running on the system. A backwards mapping is extremely useful since the tables in this MIB module are typically indexed with the installed application package (sysApplInstallPkgIndex) as the primary key, and on down as required by the specific table, with the process ID number (sysApplElmtRunIndex) being the least significant key. It is expected that management applications will use this mapping table by doing a 'GetNext' operation with the known process ID number (sysApplElmtRunIndex) as the partial instance identifier. Assuming that there is an entry for the process, the result should return a single columnar value, the sysApplMapInstallPkgIndex, with the sysApplElmtRunIndex, sysApplRunIndex, and sysApplInstallElmtIndex contained in the instance identifier for the returned MIB object value. OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 8-23