Cisco MCS-7825-H3-IPC1 Service Guide - Page 789

Chapter 7 Cisco Management Information Base CISCO-SYSLOG-MIB STATUS current DESCRIPTION The number of syslog messages which were ignored. A messagewill be ignored if it has a severity value greater than clogMaxSeverity. ::= { clogBasic 4 } clogMsgDrops OBJECT-TYPE SYNTAX Counter32 UNITS messages MAX-ACCESS read-only STATUS current DESCRIPTION The number of syslog messages which could not be processed due to lack of system resources. Most likely this will occur at the same time that syslog messages are generated to indicate this lack of resources. Increases in this object's value may serve as an indication that system resource levels should be examined via other mib objects. A message that is dropped will not appear in the history table and no notification will be sent for this message. ::= { clogBasic 5 } Syslog Message History Table clogHistTableMaxLength OBJECT-TYPE SYNTAX Integer32 (0..500) UNITS entries MAX-ACCESS read-write STATUS current DESCRIPTION The upper limit on the number of entries that the clogHistoryTable may contain. A value of zero prevents any history from being retained. When this table is full, the oldest entry will be deleted and a new one will be created. DEFVAL { 1 } ::= { clogHistory 1 } clogHistMsgsFlushed OBJECT-TYPE SYNTAX Counter32 UNITS messages MAX-ACCESS read-only STATUS current DESCRIPTION The number of entries that have been removed from the clogHistoryTable in order to make room for new entries. This object can be utilized to determine whether your polling frequency on the history table is fast enough and/or the size of your history table is large enough such that you are not missing messages. OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 7-147