Cisco MCS-7825-H3-IPC1 Service Guide - Page 890

HOST-RESOURCES-MIB Chapter 8 Industry-Standard Management Information Base MAX-ACCESS read-only STATUS current DESCRIPTION The current status of this printer device. ::= { hrPrinterEntry 1 } hrPrinterDetectedErrorState OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definitions (condition first then bit number): - lowPaper 0 - noPaper 1 - lowToner 2 - noToner 3 - doorOpen 4 - jammed5 - offline 6 - serviceRequested 7 - inputTrayMissing 8 - outputTrayMissing 9 - markerSupplyMissing 10 - outputNearFull 11 - outputFull 12 - inputTrayEmpty 13 - overduePreventMaint 14 Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the condition was detected, while a zero bit encodes that the condition was not detected. This object is useful for alerting an operator to specific warning or error conditions that may occur, especially those requiring human intervention. ::= { hrPrinterEntry 2 } hrDiskStorageTable OBJECT-TYPE SYNTAX Sequence of hrDiskStorageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION 8-86 Cisco Unified Communications Manager Managed Services Guide OL-22523-01