Cisco MCS-7825-H3-IPC1 Service Guide - Page 773

Chapter 7 Cisco Management Information Base CISCO-CDP-MIB ::= { cdpInterfaceEntry 3 } cdpInterfaceGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 group number of the repeater port which corresponds to this interface. ::= { cdpInterfaceEntry 4 } cdpInterfacePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION This object is only relevant to interfaces which are repeater ports on 802.3 repeaters. In this situation, it indicates the RFC1516 port number of the repeater port which corresponds to this interface. ::= { cdpInterfaceEntry 5 } cdpInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CdpInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION This table contains the additional CDP configuration on the device interfaces. ::= { cdpInterface 2 } cdpInterfaceExtEntry OBJECT-TYPE SYNTAX CdpInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the cdpInterfaceExtTable contains the values configured for Extented Trust TLV and COS (Class of Service) for Untrusted Ports TLV on an interface which supports the sending of these TLVs. INDEX { ifIndex } ::= { cdpInterfaceExtTable 1 } CdpInterfaceExtEntry ::= SEQUENCE { cdpInterfaceExtendedTrustINTEGER, cdpInterfaceCosForUntrustedPort Unsigned32 OL-22523-01 Cisco Unified Communications Manager Managed Services Guide 7-131