Cisco MCS-7825-H3-IPC1 Service Guide - Page 848

RFC1213-MIB (MIB-II) Chapter 8 Industry-Standard Management Information Base SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION The IP address to which this entry addressing information pertains. ::= { ipAddrEntry 1 } ipAdEntIfIndex OBJECT-TYPE SYNTAX Integer ACCESS read-only STATUS mandatory DESCRIPTION The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. ::= { ipAddrEntry 2 } ipAdEntNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. ::= { ipAddrEntry 3 } ipAdEntBcastAddr OBJECT-TYPE SYNTAX Integer ACCESS read-only STATUS mandatory DESCRIPTION The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. ::= { ipAddrEntry 4 } ipAdEntReasmMaxSize OBJECT-TYPE SYNTAX Integer (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. 8-44 Cisco Unified Communications Manager Managed Services Guide OL-22523-01