Cisco MCS-7825-H3-IPC1 Service Guide - Page 92

Cisco Unified Communications Manager, Release 8.0(1) Chapter 2 New and Changed Information The following contains the Performance Object for Cisco IME Server: VAPStatus (range from 0 to 2)-This flag indicates the overall health of the connection to the IME servers for a particular IME service. If 1, it means that Unified CM has successfully established a connection to its primary and, if configured, backup servers for the IME service. 2 = Unhealthy. 0 = Unknown. • The following contains the Performance Counters for Cisco IME Server. Table 2-10 contains information about the Performance Counters for Cisco IME Server. Table 2-10 Cisco IME Server Counters PublishedRoutes RejectedRoutes LearnedRoutes UniqueDomains FailedB2BLinkSetups B2BLinkCallsAttempted B2BLinkCallsSetup FailedFallbackCalls e164 DIDs Learned B2BLinkCallsAccepted B2BLinkCallsReceived Counter Description Total number of DIDs published successfully into the DHT across all IME services. It is a dynamic measurement, and as such, gives you an indication of your own provisioned usage in addition to a sense of how successful the system has been in storing them into the network. Number of learned routes which were rejected because the number or domain were blacklisted by the administrator. This provides an indication of the number of 'missed opportunities' - cases where a VoIP call could happen in the future, but will not due to the blocked validation. Total number of distinct phone numbers which have been learned by IME and are present as routes in Unified CM's routing tables. If this number grows too large, it may exceed the per-cluster limit, and require additional clusters for scale. Number of unique domain names of peer enterprises discovered by IME. It is an indicator of overall usage of the system. Total number of call attempts for which a IME route was available, but which were set up through the PSTN due to a failure to connect to the target over the IP network. Number of calls initiated by UCM through IME. This includes calls that are accepted, as well as busy, no-answer and failed calls. The metric is strictly on initiation. Number of IME calls successfully placed by Unified CM and answered by the remote party, resulting in an IP call. Total number of failed fallback attempts. Number of DIDs learned from the IME server. Number of IME calls successfully received by UCM and answered by the called party, resulting in an IP call. Number of calls received by Unified CM through IME. This includes calls that are accepted, as well as busy, no-answer and failed calls. The metric is strictly on initiation. For more information, see the Cisco Unified Real-Time Monitoring Tool Administration Guide. 2-50 Cisco Unified Communications Manager Managed Services Guide OL-22523-01