Dell 2335dn Dell™ 2335dn MFP User's Guide - Page 153
Restoring the Network Configuration, Dynamic Addressing BOOTP/DHCP
UPC - 884116001898
View all Dell 2335dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
7. An IP address consists of 4 bytes. 8. Enter the numbers from the keypad and use Scroll ( or ) to move between octets and then press Select ( ). 9. Enter other parameters, such as the Subnet Mask or Gateway , and then press Select ( ). 10. After entering all parameters, press Cancel ( ) to return to the Standby mode. Dynamic Addressing (BOOTP/DHCP) To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network. 1. Press Scroll ( or ) to highlight Setup and then press Select ( ). 2. Press Scroll ( or ) to highlight Network Setup and then press Select ( ). 3. Press Scroll ( or ) to highlight TCP/IP (IPv4) and then press Select ( ). 4. Press Scroll ( or ) to highlight Set IP Address and then press Select ( ). 5. Press Scroll ( or ) to highlight DHCP and then press Select ( ). To assign the address from the BOOTP server, press Select ( ) when BOOTP displays. Restoring the Network Configuration You can return the network configuration to its default settings. 1. Press Scroll ( or ) to highlight Setup and then press Select ( ). 2. Press Scroll ( or ) to highlight Network Setup and then press Select ( ). 3. Press Scroll ( or ) to highlight Clear Settings and then press Select ( ). 4. Press Scroll ( or ) to highlight Yes and then press Select ( network configuration. 5. Power the printer off and back on or reset the network interface card. ) to restore the