Dell PowerConnect W-IAP92 Dell Instant 6.1.3.4-3.1.0.0 User Guide - Page 100

Spectrum Data The spectrum data is collected by each IAP spectrum monitor and hybrid AP. The spectrum data is not reported to the VC. The Spectrum link is visible in the Instant WebUI only if you have enabled the spectrum monitoring feature. You can view the following spectrum data in the Instant WebUI:  Overview - Device list  Channel metrics  Channel details Overview - Device List The device list consists of a device summary table and channel information for active non-Wi-Fi devices currently seen by a spectrum monitor or hybrid AP radio. To view the device list, click Spectrum in the dashboard. Figure 91 Device List Table 15 Device Summary and Channel Information Column Description Type ID Cfreq Bandwidth Device type. This parameter can be any of the following:  audio FF (fixed frequency)  bluetooth  cordless base FH (frequency hopper)  cordless phone FF (fixed frequency  cordless network FH (frequency hopper)  generic FF (fixed frequency  generic FH (frequency hopper)  generic interferer  microwave  microwave inverter  video  xbox NOTE: For additional details about non-Wi-Fi device types shown in this table, see "Non-WiFi Interferers" on page 101. ID number assigned to the device by the spectrum monitor or hybrid AP radio. Spectrum monitors and hybrid APs assign a unique spectrum ID per device type. Center frequency of the signal sent from the device. Channel bandwidth used by the device. 100 | Spectrum Monitor Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide