Dell PowerConnect W-IAP92 Dell Instant 6.1.3.4-3.1.0.0 User Guide - Page 205

 RF Trends Figure 178 Instant Access Point View Info The Info section provides the following information about the selected IAP:  Name- Displays the name of the selected IAP.  IP Address- Displays the IP address of the IAP.  Mode- Displays the mode type. In Access mode the IAP serves clients, while also monitoring for rogue APs in the background. In Monitor mode, the IAP acts as a dedicated monitor, scanning all channels for rogue APs and clients.  Spectrum- Displays the status of the spectrum monitor.  Clients- Number of clients associated with the IAP.  Type- Displays the model number of the IAP.  CPU Utilization- Displays the CPU utilization in percentage.  Memory Free- Displays the memory availability of the IAP in Mega Bytes (MB).  Serial number- Displays the serial number of the IAP.  From Port- Displays the port from where the slave IAP is learned in hierarchy mode. RF Dashboard In the Instant Access Point view, the RF Dashboard section is moved below the Info section. It lists the IP address of the clients that are associated with the selected IAP if the signal strength or the data transfer speed of the client is low. Overview The Overview section displays the common RF metrics for the selected access point over the last 15 minutes. The following graphs are displayed for the selected IAP:  Neighboring APs Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide Monitoring | 205