Dell PowerConnect W-IAP92 Dell Instant 6.1.3.4-3.1.0.0 User Guide - Page 15

Figure 1 Connecting to a provisioning Wi-Fi Network - Microsoft Windows Figure 2 Connecting to a provisioning Wi-Fi Network - Mac OS Disabling the Provisioning Wi-Fi Network The provisioning network is enabled by default. Instant provides the option to disable the provisioning network in apboot. Use this option when you do not want the default SSID instant to appear in your network. To disable the provisioning network: 1. Connect a terminal or PC/workstation running a terminal emulation program to the Console port on the IAP. 2. Configure the terminal or terminal emulation program to use the following communication settings. 3. Power on the IAP. You see an autoboot countdown prompt that allows you to interrupt the normal startup process and access apboot. 4. Click Enter before the timer expires. The IAP goes into apboot mode. Table 2 Terminal Communication Settings Baud Rate Data Bits Parity Stop Bits Flow Control 960 8 None 1 None 5. In the apboot mode, use the following commands to disable the provisioning network:  apboot> factory_reset  apboot> setenv disable_prov_ssid 1  apboot> saveenv  apboot> reset Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide Initial Configuration | 15