Dell PowerConnect W-IAP92 Dell Instant 6.1.3.4-3.1.0.0 User Guide - Page 182
G/4G Uplink, Types of Modems,
View all Dell PowerConnect W-IAP92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Figure 153 Uplink Status The user can view the type of uplink and the status of the uplink in the Instant UI under Info tab. Figure 154 Uplink Status 3G/4G Uplink Instant now supports the use of 3G/4G USB modems to provide internet backhaul to an Instant network. The 3G/ 4G USB modems extend client connectivity to places where an Ethernet uplink is not feasible. This enables the RAP-3 to choose the available network in an area automatically. For 4G LTE modem, 4G takes precedence over 3G when the RAP-3 tries to auto-select the network. NOTE: The 3G and 4G LTE USB modems can be provisioned only on RAP-3. Types of Modems Instant supports the following three types of 3G modems: True Auto Detect- Modems of this type can be used only in one country and for a specific ISP. The parameters are configured automatically and hence no configuration is necessary (Plug and Play). Auto-detect + ISP/country- Modems of this type are used where user needs to specify the Country and ISP. The same modem is used for different ISPs with different parameters configured for each of them. No auto-detect-Modems of this type are used where the modems share the same Device-ID, Country, and ISP, but need to configure different parameters for each of them. These modems work with Instant provided the correct parameters are configured. All the new auto-detected modems falls under this category as the parameter necessary to automatically configure them are unknown. The following table lists the types of supported 3G modems: 182 | Uplink Configuration Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide