Dell PowerConnect W-IAP92 Dell Instant 6.1.3.4-3.1.0.0 User Guide - Page 46

5. Select the required Client IP assignment option - Virtual Controller assigned and Network assigned. Table 5 Conditions for Client IP and VLAN assignment If then You select Virtual Controller assigned You select Network assigned The client gets the IP address from the Virtual Controller. The Virtual Controller creates a private subnet and VLAN on the IAP for the wireless clients. The Virtual Controller NATs all traffic that passes out of this interface. This setup eliminates the need for complex VLAN and IP address management for a multi site wireless network. See Chapter 9, "Virtual Controller" on page 107 for configuring the DHCP server. By default, the client VLAN is assigned to the native VLAN on the wired network.  Default- The client gets the IP address in the same subnet as the IAPs.  Static- Select to specify a VLAN for all clients on this network.  Dynamic- Select to create rules for per-user VLAN assignment. See "VLAN Derivation Rule" on page 142 for more information. 6. Click Next to continue. 7. Set the appropriate security levels using the slider in the Security tab. The default level is Personal. The available options are Enterprise, Personal, and Open which are described in the following tables. Figure 38 Employee Security Tab- Enterprise 46 | Wireless Network Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide