Dell PowerConnect W-IAP92 Dell Instant 6.1.3.4-3.1.0.0 User Guide - Page 81
Configuring Adaptive Radio Management,
View all Dell PowerConnect W-IAP92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Figure 66 Configuring IAP Settings - Connectivity Tab 3. Select either the Get IP address from DHCP server or Specify statically option. If you have selected the Specify statically option, then perform the following steps: 1. Enter the new IP address for the IAP in the IP address text box. 2. Enter the netmask of the network in the Netmask text box. 3. Enter the IP address of the default gateway in the Default gateway text box. 4. Enter the IP address of the DNS server in the DNS server text box. 5. Enter the domain name in the Domain name text box. Figure 67 Configuring IAP Connectivity Settings - Specifying Static Settings 4. Click OK and reboot the IAP. Configuring Adaptive Radio Management Adaptive Radio Management (ARM) is enabled in Dell Instant by default. However, if ARM is disabled, perform the following steps to enable it. 1. In the Access Points tab, click the IAP for which you want to configure ARM. Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide Managing IAPs | 81