Dell PowerConnect W-IAP92 Dell Instant 6.1.3.4-3.1.0.0 User Guide - Page 32

 VC Application Services- Displays the details of application services of the selected IAP, which includes protocol number, port number.  VC Global Alerts- Displays all the alerts about client of the selected IAP.  VC Global Statistics- Displays the flow information and signal strength of the selected IAP.  VC Local User Database- Displays the user configuration of the selected IAP.  VC Radius Attributes- Displays the RADIUS attributes of the selected IAP.  VC Radius Servers- Displays the RADIUS servers' configuration of the selected IAP.  VC Saved Configuration- Displays the saved configuration information of the selected IAP.  VC SNMP Configuration- Displays the SNMP configuration of the selected IAP.  AP Summary- Displays the IAP configuration.  Debug Logs- Displays debug logs of the selected IAP.  Driver Logs- Displays the driver logs of the selected IAP.  Tech Support Dump- Displays the technical support dump logs of the selected IAP.  Active Configuration- Displays the active configuration of Virtual Controller.  Saved Configuration- Displays the saved configuration of Virtual Controller.  AP Management Frames- Displays the traced 802.11 management frames of the selected IAP.  AP Authentication Frames- Displays the authentication trace buffer information of the selected IAP.  AP System Status- Displays detailed system status information for the selected IAP.  AP Crash Info- Displays crash log information (if it exists) for the selected IAP. The stored information is cleared from the flash after the AP reboots.  AP 802.1X Statistics- Displays the 802.1X statistics of the selected IAP.  AP RADIUS Statistics- Displays the RADIUS statistics of the selected IAP.  AP System Status- Displays the system status of the selected IAP.  AP Client Table- Displays information of the client connected to the selected IAP.  AP Association Table- Displays information of the selected IAP association.  AP Allowed Channels- Displays information of the allowed channels for the selected IAP.  AP Radio 0 Stats- Displays aggregate debug statistics of the selected IAP Radio 0.  AP Radio 1 Stats- Displays aggregate debug statistics of the selected IAP Radio 1.  Bridge Table- Displays bridge table entry statistics including Mac address, VLAN, assigned VLAN, Destination and flag information for the selected IAP.  User Table- Displays datapath user statistics such as current entries, pending deletes, high water mark, maximum entries, total entries, allocation failures, invalid users, and maximum link length for the selected IAP.  Session Table- Displays the datapath session table statistics for the selected IAP.  Route Table- Displays datapath route table statistics for the selected IAP.  Datapath Statistics- Displays the hardware packet statistics for the selected IAP.  VLAN Table- Displays the VLAN table information such as VLAN memberships inside the datapath including L2 tunnels for the selected IAP.  BSSID Table- Displays the Basic Service Set (BSS) table of the selected IAP.  IDS Status- Displays WLAN Interface, Data Structures, WLAN Interface Switch Status and RTLS Configuration tables for the selected IAP.  IDS AP Table- Displays the Monitored IAP Table, which lists all the IAPs monitored by the selected IAP.  ARM Bandwidth Management- Displays bandwidth management information for the selected IAP. 32 | Instant User Interface Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide