Dell PowerEdge T100 Hardware Owner's Manual - Page 18
System Messages, probable cause and corrective action for each message. - bios update
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
System Messages System messages appear on the screen to notify you of a possible problem with the system. Table 1-6 lists the system messages that can occur and the probable cause and corrective action for each message. NOTE: If you receive a system message that is not listed in Table 1-6, check the documentation for the application that is running when the message appears or the operating system's documentation for an explanation of the message and recommended action. CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system. Table 1-6. System Messages Message Causes Corrective Actions Attempting to update Remote Configuration. Please wait.... Remote Configuration is in Wait until the process is progress. complete. BIOS Update Attempt Remote BIOS update Failed! attempt failed. Retry the BIOS update. If the problem persists, see "Getting Help" on page 139. Caution! NVRAM_CLR NVRAM_CLR jumper is jumper is installed installed. on system board. Check the System Setup configuration settings. See "Using the System Setup Program" on page 29. Remove the NVRAM_CLR jumper. See Figure 6-1 for jumper locations. 18 About Your System