Dell PowerEdge T100 Hardware Owner's Manual - Page 81
Release the socket-release lever before opening the processor shield. See,
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Figure 3-21. Installing and Removing the Heat Sink 1 2 3 1 heat sink and shroud assembly 3 captive screws (2) 4 2 pivot bracket 4 diskette cable 6 Release the socket-release lever before opening the processor shield. See Figure 3-22. 7 Rotate the processor shield upward and out of the way. 8 Lift the processor out of the socket and leave the release lever up so that the socket is ready for the new processor. NOTICE: Be careful not to bend any of the pins on the ZIF socket when removing the processor. Bending the pins can permanently damage the system board. Installing System Components 81
Installing System Components
81
Figure 3-21.
Installing and Removing the Heat Sink
6
Release the socket-release lever before opening the processor shield. See
Figure 3-22.
7
Rotate the processor shield upward and out of the way.
8
Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
NOTICE:
Be careful not to bend any of the pins on the ZIF socket when removing
the processor. Bending the pins can permanently damage the system board.
1
heat sink and shroud assembly
2
pivot bracket
3
captive screws (2)
4
diskette cable
1
2
3
4