Dell PowerEdge T100 Hardware Owner's Manual - Page 98
connect the I/O panel ribbon cable to the new I/O panel connector. See
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
3 Secure the I/O panel ribbon cable through the clips beneath the 3.5 optional diskette drive and on the side of the power supply shroud, and connect the I/O panel ribbon cable to the new I/O panel connector. See Figure 3-31. Figure 3-31. Cabling the I/O Panel Assembly 5 6 1 4 1 I/O panel connector 3 I/O panel assembly 5 cable clip on power supply 3 2 2 front drive bezel 4 4-pin power cable to system board 6 I/O panel ribbon cable 4 Replace the large processor cooling fan. See "Replacing the Cooling Fans" on page 86. 98 Installing System Components
98
Installing System Components
3
Secure the I/O panel ribbon cable through the clips beneath the
3.5 optional diskette drive and on the side of the power supply shroud, and
connect the I/O panel ribbon cable to the new I/O panel connector. See
Figure 3-31.
Figure 3-31.
Cabling the I/O Panel Assembly
4
Replace the large processor cooling fan. See "Replacing the Cooling Fans"
on page 86.
1
I/O panel connector
2
front drive bezel
3
I/O panel assembly
4
4-pin power cable to system board
5
cable clip on power supply
6
I/O panel ribbon cable
5
3
6
1
4
2