Dell PowerEdge T100 Hardware Owner's Manual - Page 93
Installing the Chassis Intrusion Switch
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
4 Slide the chassis intrusion switch out of the securing bracket notch. See Figure 3-28. 5 Remove the switch and its attached cable from the system. Figure 3-28. Removing and Installing the Chassis Intrusion Switch 1 2 3 1 chassis intrusion switch 3 INTRUSION SWITCH connector 2 securing bracket notch Installing the Chassis Intrusion Switch 1 Align the chassis intrusion switch with the securing bracket notch. See Figure 3-28. 2 Slide the switch into the securing bracket notch. 3 Connect the switch cable to the INTRUSION SWITCH connector on the system board. Installing System Components 93
Installing System Components
93
4
Slide the chassis intrusion switch out of the securing bracket notch. See
Figure 3-28.
5
Remove the switch and its attached cable from the system.
Figure 3-28.
Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1
Align the chassis intrusion switch with the securing bracket notch. See
Figure 3-28.
2
Slide the switch into the securing bracket notch.
3
Connect the switch cable to the INTRUSION SWITCH connector on the
system board.
1
chassis intrusion switch
2
securing bracket notch
3
INTRUSION SWITCH connector
1
2
3