Dell PowerEdge T100 Hardware Owner's Manual - Page 89
Installing the System Battery, Using the System Setup Program
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Figure 3-26. Removing and Installing the System Battery 2 1 3 1 battery socket 3 tab 2 system battery Installing the System Battery 1 Push the new battery into the battery socket as shown in Figure 3-26. NOTE: The side of the battery labeled "+" (plus sign) must face toward the open side of the battery socket. 2 Close the system. See "Closing the System" on page 47. 3 Reconnect the system to the electrical outlet and turn on the system and attached peripherals. 4 Enter the System Setup program to confirm that the battery operates properly. See "Using the System Setup Program" on page 29. 5 From the main screen, select System Time to enter the correct time and date. 6 Re-enter any system configuration information that is no longer displayed on the System Setup screens, and then exit the System Setup program. 7 To test the newly installed battery, see "Troubleshooting the System Battery" on page 112. 8 After an hour, reconnect the system to a power source and turn it on. Installing System Components 89