Dell PowerEdge T100 Hardware Owner's Manual - Page 95
Replacing the Bezel, Reinstall the heat sink and shroud assembly. See Replacing the Processor
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Figure 3-29. Removing the Bezel 1 4 3 1 alignment slot 3 bezel 2 2 bezel release screws (2) 4 alignment tab Replacing the Bezel 1 Align the bezel with the chassis frame and slide it into position. 2 Secure the alignment tabs into their alignment slots. 3 Attach the two bezel release screws to secure the bezel to the system chassis. See Figure 3-29. 4 Replace the processor fan. See "Replacing the Cooling Fans" on page 86. 5 Reinstall the heat sink and shroud assembly. See "Replacing the Processor" on page 82. 6 Close the system. See "Closing the System" on page 47. 7 Reconnect the system to the electrical outlet, and turn on the system. Installing System Components 95
Installing System Components
95
Figure 3-29.
Removing the Bezel
Replacing the Bezel
1
Align the bezel with the chassis frame and slide it into position.
2
Secure the alignment tabs into their alignment slots.
3
Attach the two bezel release screws to secure the bezel to the system
chassis. See Figure 3-29.
4
Replace the processor fan. See "Replacing the Cooling Fans" on page 86.
5
Reinstall the heat sink and shroud assembly. See "Replacing the Processor"
on page 82.
6
Close the system. See "Closing the System" on page 47.
7
Reconnect the system to the electrical outlet, and turn on the system.
1
alignment slot
2
bezel release screws (2)
3
bezel
4
alignment tab
3
2
1
4