Dell PowerEdge T100 Hardware Owner's Manual - Page 20
DIMM1_B, Gate A20 failure - size
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 1-6. System Messages (continued) Message Causes Corrective Actions Error: Incorrect memory configuration. Ensure memory in slots DIMM1_A and DIMM1_B, DIMM2_A and DIMM2_B match identically in size, speed and rank. The installed memory modules are not matched pairs. See "Memory Module Installation Guidelines" on page 75. Error 8602: Auxiliary device failure. Verify that mouse and keyboard are securely attached to correct connectors. Loose or improperly connected mouse or keyboard cable; faulty mouse or keyboard. Replace the mouse. If the problem persists, replace the keyboard. Gate A20 failure Faulty keyboard controller See "Getting Help" on (faulty system board). page 139. General failure The operating system is unable to carry out the command. This message is usually followed by specific information. Take the appropriate action to resolve the problem. Keyboard controller Faulty keyboard controller See "Getting Help" on failure (faulty system board). page 139. Keyboard data line failure Keyboard failure Keyboard stuck key failure Loose or improperly connected keyboard cable; faulty keyboard; faulty keyboard controller. Ensure that the keyboard is properly connected. If the problem persists, replace the keyboard. If the problem persists, see "Getting Help" on page 139. 20 About Your System