Dell PowerEdge T100 Hardware Owner's Manual - Page 69
Reconnect the system to the electrical outlet, and turn on the system
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 3-17. Attaching a SAS or SATA Hard Drive to a SAS Controller Expansion Card 12 3 4 5 6 1 power cable to hard drive (female) 3 SAS or SATA hard drives (2) 5 data cable to SAS controller card 2 power cable to hard drive (male) 4 data cable to hard drive 6 SAS controller card 10 Ensure that all connectors are properly cabled and firmly seated. 11 Close the system. See "Closing the System" on page 47. 12 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. See the documentation that came with the drive for instructions on installing any software required for drive operation. Installing System Components 69
Installing System Components
69
Figure 3-17.
Attaching a SAS or SATA Hard Drive to a SAS Controller Expansion Card
10
Ensure that all connectors are properly cabled and firmly seated.
11
Close the system. See "Closing the System" on page 47.
12
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
1
power cable to hard drive (female)
2
power cable to hard drive (male)
3
SAS or SATA hard drives (2)
4
data cable to hard drive
5
data cable to SAS controller card
6
SAS controller card
5
6
3
4
2
1