Dell PowerEdge T100 Hardware Owner's Manual - Page 63
Replace the front drive bezel. See Replacing the Front Drive Bezel
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Figure 3-13. Cabling a SATA Controller to the Optical Disk Drive 5 6 1 4 3 2 1 system board 3 optical disk drive 5 cable clip 2 front drive bezel 4 SATA power cable 6 SATA optical disk cable 10 Attach the data cable. If you are installing a SCSI tape drive, connect the SCSI interface cable in the drive kit from the SCSI controller card to the drive. See Figure 3-12. 11 Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents. 12 Replace the front drive bezel. See "Replacing the Front Drive Bezel" on page 49. 13 Close the system. See "Closing the System" on page 47. 14 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. Installing System Components 63