Dell PowerEdge T100 Hardware Owner's Manual - Page 67
Connect the data cable to the hard drive
View all Dell PowerEdge T100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Figure 3-15. Installing a Hard Drive in a Drive Bracket 1 2 1 hard drive 2 hard drive bracket NOTICE: SAS drives and SATA drives cannot be mixed in the system. The drives must be either SATA or SAS hard drives. NOTE: The SAS controller card must be installed in either PCIe SLOT1 or PCIe SLOT2. See Figure 6-2. 8 Connect the power cable to the hard drive. 9 Connect the data cable to the hard drive: • For connection to the integrated SATA controller (SATA hard drives only), connect the SATA data cable to the SATA_A (first drive) and SATA_B (second drive) connectors on the system board. See Figure 3-16. See Figure 6-2 for the location of the hard drive connectors on the system board. Installing System Components 67
Installing System Components
67
Figure 3-15.
Installing a Hard Drive in a Drive Bracket
NOTICE:
SAS drives and SATA drives cannot be mixed in the system. The drives
must be either SATA or SAS hard drives.
NOTE:
The SAS controller card must be installed in either PCIe SLOT1 or PCIe
SLOT2. See Figure 6-2.
8
Connect the power cable to the hard drive.
9
Connect the data cable to the hard drive:
•
For connection to the integrated SATA controller (SATA hard drives
only), connect the SATA data cable to the SATA_A (first drive) and
SATA_B (second drive) connectors on the system board. See
Figure 3-16. See Figure 6-2 for the location of the hard drive
connectors on the system board.
1
hard drive
2
hard drive bracket
1
2