HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Configuration G - Page 200
on Switch A., Display tunnel interface information on Switch A and Switch B.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
# Configure the source address of tunnel interface as the IP address of VLAN-interface 101 on Switch B. [SwitchB-Tunnel1] source vlan-interface 101 # Configure the destination address of the tunnel interface as the IP address of VLAN-interface 101 on Switch A. [SwitchB-Tunnel1] destination 1.1.1.1 [SwitchB-Tunnel1] quit # Configure a static route from Switch B through the tunnel interface to Group 1. [SwitchB] ip route-static 10.1.1.0 255.255.255.0 Tunnel 1 3. Verify the configuration: # Display tunnel interface information on Switch A and Switch B. [SwitchA] display interface tunnel 1 Tunnel1 current state: UP Line protocol current state: UP Description: Tunnel1 Interface The Maximum Transmit Unit is 1476 Internet Address is 10.1.2.1/24 Primary Tunnel source 1.1.1.1, destination 2.2.2.2 Tunnel bandwidth 64 (kbps) Tunnel keepalive disabled Tunnel TTL 255 Tunnel protocol/transport GRE/IP GRE key disabled Checksumming of GRE packets disabled Last clearing of counters: Never Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 drops 0 packets output, 0 bytes, 0 drops [SwitchB] display interface tunnel 1 Tunnel1 current state: UP Line protocol current state: UP Description: Tunnel1 Interface The Maximum Transmit Unit is 1476 Internet Address is 10.1.2.2/24 Primary Tunnel source 2.2.2.2, destination 1.1.1.1 Tunnel bandwidth 64 (kbps) Tunnel keepalive disabled Tunnel TTL 255 Tunnel protocol/transport GRE/IP GRE key disabled Checksumming of GRE packets disabled Last clearing of counters: Never Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 drops 0 packets output, 0 bytes, 0 drops 192